Product ID:1348349 3812 PRINTER TONER
MSDS Date:02/08/1990
FSC:6850
NIIN:01-262-5404
MSDS Number: BRFVH

IBM CORP

OLD ORCHARD ROAD
ARMONK, NY 10504-1709
US

Emergency Phone: 800-IBM-4333

Info Phone: 800-IBM-4333

Cage: 7N876

IBM CORPORATION

ARMONK, NY 10504-1709 US

Telephone: 800-426-4333/FAX 214-280-3903

Cage: 30874

STYRENE POLYMER WITH 1,3-BUTADIENE

CAS: 9003-55-8

RTECS: WL6478000

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 15%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9293

AZOIC DYE

CAS: 41741-86-0

Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Explanation of Carcinogenicity:NO INGREDIENTS OF A CONCENTRATION OF
0.1% OR GREATER ARE LISTED AS CARCINOGENS BY NTP, IARC, OR OSHA.
Effects of Overexposure:EYES; REDNESS, DISCOMFORT.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHALED: REMOVE TO FRESH AIR. INGESTED: NONE. SKIN: WASH WITH
SOAP AND WATER. EYES: FLUSH WITH WATER FOR 15 MINUTES, HOLD LIDS
OPEN. SEE DOCTOR IF SYMPTOMS PERSIST.

Extinguishing Media:WATER, DRY CHEMICAL, CARBON DIOXIDE, FOAM
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
FULL BUNKER GEAR.
Unusual Fire/Explosion Hazard:LIKE MANY FINELY DIVIDED MATERIALS, TONER
DUST, CAN FORM AN EXPLOSIVE MIXTURE IN AIR WHICH, IF IGNITED, COULD
RESULT IN A DUST EXPLOSION.

Spill Release Procedures:MINIMIZE DUST GENERATION DURING CLEANUP. USE
VACCUM TO PICK-UP MATERIAL. COLLECT AND PLACE IN A CLOSED CONTAINER
FOR LATER DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID EXCESSIVE HEAT DURING STORAGE.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.

Respiratory Protection:NONE NORMALLY REQUIRED.
Ventilation:NONE NORMALLY REQUIRED.
Protective Gloves:NONE NORMALLY REQUIRED.
Eye Protection:NONE NORMALLY REQUIRED.
Other Protective Equipment:NONE NORMALLY REQUIRED.
Work Hygienic Practices:WASH HANDS AFTER HANDLING.
Supplemental Safety and Health

HCC:N1
Spec Gravity:1.1 (WATER=1)
Appearance and Odor:BLACK POWDERY MATERIAL, SLIGHT ODOR

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER. CONTACT
WITH STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON DIOXIDE,
OXIDES OF NITROGEN, INIDENTIFIED ORGANICS.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.